Power Metal Resources #POW – Haneti Project – Drill Mobilisation

Power Metal Resources plc (LON:POW) the AIM listed metals exploration and development company is pleased to provide an update confirming mobilisation of the maiden drill programme targeting the discovery of nickel and platinum group metals (“PGM”) at the  Haneti Nickel Project in Tanzania.

Power Metal holds a 35% ownership interest in Haneti with 65% held by Katoro Gold plc (LON:KAT)(“Katoro”).

HIGHLIGHTS:

• Drill contract now signed with Amazon Drilling Limited, Morogoro, Tanzania.
• All phases of pre – deployment activity, notably liaison and coordination with the Ministry of Mining as well as the relevant regional local and village authorities was conducted and completed.  We thank the Ministry, all authorities and the communities for their help and support.
• Drilling rig and supporting personnel and equipment have been fully prepared and are now mobilising to the first drill location subject to any changes in Covid-19 restrictions.
• Maiden drill programme will involve 2,000 metres of Rotary Air Blast (“RAB”) drilling with a planned 50 holes to circa 40 metres depth.
• The RAB holes will be drilled on profiles across the three target areas in order to provide enhanced information of the subsurface shape and orientation of the ultramafic bodies being targeted and allowing for the optimisation of a planned follow-on diamond drill programme.
• Power Metal’s pro-rata costs contribution in respect of the programme are fully covered from existing cash resources.
• Images from Haneti may be viewed on a new Gallery section of the Company’s website through the following link:

https://www.powermetalresources.com/p/230/haneti-project-gallery 

Paul Johnson Chief Executive Officer of Power Metal Resources plc commented:

“Mobilisation for the maiden drill programme at Haneti has been a long anticipated event and I am extremely pleased to confirm this is now underway.

Across a project covering some 5,000 km², we are focusing here on an initial three target areas which are part of an 80km long ultramafic belt which is prospective principally for nickel sulphide and PGM mineralisation.

For Katoro and Power Metal this is a notable event, delivering on the promise of maiden drilling at Haneti and seeking a major metal discovery.

Power Metal are delighted to have a significant exposure to the Haneti Project which is now our third project interest where drill programmes are underway.”

HANETI PROJECT – NICKEL SULPHIDE AND PGM TARGETS – FURTHER INFORMATION

PROJECT OVERVIEW

The Haneti Nickel Project covers an area of approximately 5,000 km² in central Tanzania approximately 88 km north of the capital city Dodoma. It comprises tenements (prospecting licences, offers and applications) prospective for nickel, PGMs and gold.

One of the key exploration objectives for the JV partners at Haneti is to delineate the potential for economic nickel mineralisation on the linear dyke-like, Haneti-Itiso Ultramafic Complex (“HIUC”) which sporadically crops out over a strike length of 80 km through the centre of the tenement holding. The HIUC mainly comprises serpentinites (metamorphosed ultrabasic rocks such as dunite and peridotite), with metabasic rocks such as metagabbro and metadolerite and is being targeted for a Chonolith-Type Nickel exploration model.

RAB DRILL PROGRAMME

An initial three target areas have been selected for RAB drilling; Milhanza Hill; Mwaka Hill; and Igari Hill. These targets are based on the recommendations of the 2012 airborne electromagnetic (“AEM”) geophysics survey, the detailed field programme undertaken in 2013 and further supplementary exploration findings.

The planned 2,000m RAB drilling programme will consist of approximately 50 holes drilled on linear fences across the targets. The programme will seek to verify the existence of near surface nickel sulphide mineralisation at each target whilst increasing the geological understanding such that the orientation and the meterage of a planned follow-up diamond drill programme can be optimised to confirm the scale of any nickel sulphide mineralisation.

The drilling will be conducted by an experienced Tanzanian company in line with international best practice and in accordance to health and safety and Covid-19 precautions.

HISTORIC NICKEL EXPLORATION

The Haneti area was first explored in 1931 by a private prospector who collected a nickel‐rich magnetite sample at Mihanza Hill. Later trenching uncovered a few discontinuous green‐stained veins rich in nickel‐silicates and containing several percent nickel.

In the early 1960s the Geological Survey of Tanzania carried out mapping, pitting, soil sampling, trenching and rock chip sampling of ultramafic outcrops on the Zoani, Mindii and Mihanza hills, within the HIUC belt. 

Further geological mapping and sampling was undertaken in 2006, 2007 and in 2013.

An AEM geophysics survey was completed over the Mihanza and Mwaka Hill anomalies in 2012 with further geophysics flown in 2015.

A study commissioned with a consultant expert in ultramafic geochemistry in 2015 identified the nickel, copper, platinum, palladium anomaly at Mihanza Hill as a drill ready target. This report suggested that the Itiso‐Haneti Ultramafic body may fit the Chonolith-Type Nickel exploration model which would imply that the main ultramafic belt may have small discrete sulphide bodies associated with it.

In 2019 a number of soil samples, collected during the 2013 exploration programme, were sent for analysis and the results confirmed the existing knowledge base and also identified a new ultramafic subcrop.

COMPETENT PERSON STATEMENT

The technical information contained in this disclosure has been read and approved by Mr Nick O’Reilly (MSc, DIC, MIMMM, MAusIMM, FGS), who is a qualified geologist and acts as the Competent Person under the AIM Rules – Note for Mining and Oil & Gas Companies. Mr O’Reilly is a Principal consultant working for Mining Analyst Consulting Ltd which has been retained by Power Metal Resources PLC to provide technical support.

The information contained within this announcement is considered to be inside information prior to its release, as defined in Article 7 of the Market Abuse Regulation No.596/2014 and is disclosed in accordance with the Company’s obligations under Article 17 of those Regulations.

For further information please visit https://www.powermetalresources.com/ or contact:

Notes to Editors:

Power Metal Resources plc (LON:POW) is an AIM listed metals exploration and development company seeking a large scale metal discovery.

The Company has a global portfolio of project interests including precious metals exploration in North America and Australia together with base metal exploration in Africa. Project interests range from early stage greenfield exploration to later stage prospects currently subject to drill programmes.

The Board and its team of advisors have expertise in project generation, exploration and development and have identified an opportunity to utilise the Company’s position to become a leader in the London market for investors wishing to gain exposure to proactive global metals exploration.